Home > Anchor Points > Specialty Anchors >

Pro Continuous Insert Anchor for 1-5/8" Strut

AN220A Continuous Concrete Insert Anchor for 1-5/8" Strut

Alternative Views:

AN220A Continuous Concrete Insert Anchor

Our Price: $74.00

Availability: Currently Unavailable
Product Code: AN220A


Pro Continuous Insert Anchor for 1-5/8" Strut

Model: AN220A

Continuous concrete insert anchor fits 1-5/8" (4.1cm) wide strut material with Saflok™ steel carabiner.

  • Accommodates 1-5/8" (4.1cm) wide strut material providing fall arrest anchor point
  • Versatile and simple installation provides a safe fall arrest tie-off point on overhead strut material such as Unistrut™, Globstrut™ or Hiltistrut™.
  • Complete hands-free horizontal mobility
  • Anchor slides across the overhead strut following you as you work, for complete freedome of movement and added productivity.
  • Compact and lightweight design
  • Makes attaching to the anchorage structure simple, fast and easy for added worker satisfaction and productivity.
  • High strength stainless steel
  • With an overall 5,000 lb. (22kN) strength and a 310 lb. (141kg) user capacity, the device provides a strong and safe connection and offers additonal tool carrying flexibility.
  • Extremely rugged and corrosion resistant stainless steel
  • Stainless steel construction offer maximum durability to stand-up to the toughest environments, providing added longevity.
  • Self closing and locking Saflok™ steel carabiner
  • Double-action mechanism automatically closes and locks to keep all components of your safety system firmly attached.
  • Extremely simple and economical design
  • No special training or tools are required for set-up or use and multiple anchors can easily be placed throughout the workspace as needed.
  • OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req.
Strut Size: The Insert Anchor mobile anchorage device is designed to be used with standard 1-5/8” strut of 12 gauge or heavier construction. Under no circumstances should this anchor device be used on strut with dimensions outside this range.

Beam Slope: The Insert Anchor mobile anchorage device is designed to operate on strut with less than 5 degrees of slope. Should the unit be used on strut with a slope greater than 5 degrees , there is the risk of the unit sliding after impact loading and creating a dangerous situation for the user.

Structure Review: Ensure that the strut you will be connecting to is properly supported before securing the connecting subsystem to the Insert Anchor mobile anchorage device. Approach the strut using appropriate access equipment. Prior to use a qualified person must determine that the strut to be anchored to is capable of supporting 450 lbs. static load per linear inch. Contact Protecta for information about connecting more than one user to a single piece of strut.

Strut: Secure the Insert Anchor rail anchor only to strut that is capable of supporting the required loads.

Insert Anchor Instructions

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Anchor Points > Specialty Anchors
Anchor Points > Steel Anchors
Anchor Points > Concrete Anchors
Anchor Points
Fall Arrest Systems > System Accessories
Manufacturers > Protecta