Home > Accessories > Rope Grabs >

Rope Grab for Galvanized or Stainless Steel Wire Rope 3/8”

3/8" Wire Rope Grab | US-5038E

Alternative Views:

3/8" Wire Rope Grab | US-5038E

Our Price: $159.00

Availability: Usually Ships in 24 to 48 Hours
Product Code: US-5038E

This cable grab is a cam actuated fall arrester, which slides freely up and down a stainless steel or galvanized steel wire cable of 3/8” (10mm) diameter and locks on the cable to arrest a fall.

COMPATIBILITY AND USE This cable grab is connected to the sternal (chest) attachment point(s) on the harness via a carabiner. Use Only an ANSI/OSHA Approved Carabiner with a 3/8”(10mm) Round Cross Section Body, No Longer Than 9”(200mm) Use only 3/8” (10mm) Diameter wire Cable with a minimum breaking strength of 6000 lbs (27KN)
  • Must be 3/8” (10mm) diameter (see COMPATIBILITY AND USE)
  • There should be no kinks, frays and corrosion.
  • Must be free from grease, oil or dirt It should be tied off or weighted at the bottom.
  • MUST be used with a Shock-Absorbing lanyard or on a cable with an integrated shock absorber to limit arrest force
  • MEETS OSHA & ANSI Z359.1

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Accessories > Rope Grabs
Manufacturers > Ultra-Safe Fall Protection