Home > Anchor Points > Concrete Anchors >

10K Concrete Anchor

10K Concrete Anchor | Guardian 00236


10K Concrete Anchor

Our Price: $219.00

Availability: Usually Ships in 24 to 72 Hours
Product Code: 00236


Guardian 00236 Concrete Anchor

The Guardian Fall Protection 10K Concrete Anchorage Connector is designed for use in 10 inch thick, cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 10K Concrete Anchorage Connector fits holes of 1 inch in diameter and 4-1/2 inches deep, and has an ultimate breaking strength of 10,000 pounds.


  • Used in concrete substrate only
  • Applications include: fall protection, restraint, work positioning, horizontal lifelines
  • Bright yellow tubing
  • Can fit a 1" hole diameter, 4¼" deep minimum
  • 10,000 lb. rated anchor
  • REGULATORY COMPLIANCE: ANSI Z359.1-2007, ANSI Z359.7-2011, OSHA 1926.502, OSHA 1910.66, CE 0321 / EN 795:1996 (+A1:2000) Class B

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Anchor Points > Concrete Anchors
Anchor Points
Manufacturers > Guardian Fall Protection